Free NS0-520 Exam Braindumps

- (Exam Topic 2)
Exhibit.

An administrator is configuring FCoE on Cisco Nexus switches for a new AFF A200 ONTAP cluster. The administrator executes the commands shown in the exhibit to create the necessary network configuration.
Which VLAN is responsible for controlling the FCoE traffic on the new interface?

1. A. 3011
2. B. 23
3. C. 11

Correct Answer: B

- (Exam Topic 1)
You create a 20 GB LUN in a newly created 100 GB FlexVol volume. You then write 5 GB of data to the LUN. You have space reservation disabled on the LUN.
In this scenario, how much space do you have left on the volume?

1. A. 95 GB
2. B. 80 GB
3. C. 75 GB
4. D. 85 GB

Correct Answer: A
Reference: https://library.netapp.com/ecmdocs/ECMP1368017/html/GUID-0E0B085C-5A42-43F3-9CCD- 4FD699BA6C89.html

- (Exam Topic 1)

A customer has an AFF A700 connected to a Cisco switch and has verified connectivity but cannot see any LUNs. The customer issued the run -node scaling-01 -command fcp topology show command to verify the connection.
Referring to the exhibit, what needs to be enabled on the Cisco switch?

1. A. Trunking needs to be enabled.
2. B. VSAN needs to be enabled.
3. C. NPIV needs to be enabled.
4. D. VFC needs to be enabled.

Correct Answer: D

- (Exam Topic 1)
A company has 20 ESX hosts. Ten of the hosts are connected using FC, and the rest are connected over iSCSI. The FC host HBA queue depth is set to 32, and the iSCSI LUN queue depth is set to 64. The FC hosts are now experiencing random connectivity issues.
In this scenario, what would be the reason for the disconnects?

1. A. The FC host has a lower queue depth.
2. B. According to the IMT, unsupported HBA firmware is in use.
3. C. All of the hosts are part of the same cluster.
4. D. The queue depth is not consistent across the cluster.

Correct Answer: A

- (Exam Topic 2)
You want to access and mount a Linux L.UN using only iSCSl. In the past, the LUN ha;; been accessed using FC. What must you do to accomplish this task?

1. A. Change the LUN protocol type to (SCSI.
2. B. Create a new iSCSI igrou
3. C. and change the LUN mapping from the original to the new igroup.
4. D. Create a new iSCSI Igroup and map the LUN to both the new and existing FC igroup.
5. E. Add an iSCSI protocol type to the existing igroup so that the LUN can be accessed by both FC and iSCSI hosts.

Correct Answer: B