Free 220-1101 Exam Braindumps

A technician is replacing the RAM on an entry-level server with hot-swappabte components. Which of the following should the technician do NEXT?

1. A. Replace the RAM while the server is at a cool temperature
2. B. Replace the RAM while the server is running
3. C. Power down the server completely and then replace the RAM
4. D. Verify that the OS supports hot swapping the RAM

Correct Answer: C

A technician made several upgrades to a computer and then determined the power supplied by the PSU is insufficient. Which of the following would MOST likely cause the insufficiency? (Select TWO).

1. A. Replacing the HDD with an SSD
2. B. Upgrading the firmware
3. C. Adding an optical drive
4. D. Adding more RAM
5. E. Adding a CMOS battery
6. F. Upgrading the graphics card

Correct Answer: CF
https://www.buildcomputers.net/power-consumption-of-pc-components.html

A technician was called in to look at a user's PC. The user reported the PC was very sluggish. The HDD light on the PC was constantly on without blinking. The PC itself was slow receiving input and took a very long time to load the OS. The technician also noticed updates had failed. Which of the following is MOST likely the cause of these issues?

1. A. The hard disk drivers have been corrupted
2. B. The HDD cables need reseating.
3. C. A RAID disk failed.
4. D. The HDD has no free space.

Correct Answer: A

A technician is upgrading a faulty motherboard that was ordered by an end user for an old, high-end desktop computer. However, the technician is unable to install the CPU into the socket. Upon closer inspection, the technician notices the pins on the CPU do not line up with the socket. Which of the following would be the best course of action for the technician to take NEXT?

1. A. Try to set as many pins as possible.
2. B. Install an adaptor to create a universal socket.
3. C. Verify the socket type and manufacturer.
4. D. Find a compatible motherboard for the CPU.

Correct Answer: C
you need to know the socket type before you can go and find the replacement motherboard

A technician is configuring a workstation to be used as a VM host. After installing the necessary software, the technician is unable to create any VMs. Which of the following actions should be performed?

1. A. Disable the BIOS password.
2. B. Enable TPM.
3. C. Enable multithreading.
4. D. Enable Fast Startup.

Correct Answer: B
If you want to install Windows 11 on a virtual machine using Hyper-V, you will have to use a “Generation 2” VM and enable the “trusted platform module” (TPM) and Secure Boot options. Otherwise, the OS won’t install.
Starting with Windows 11, Microsoft is changing the system requirement and making TPM 2.0 and Secure Boot a prerequisite to perform an in-place upgrade or clean install the new version on any device. This is in addition to the new 4GB of RAM and at least 64GB of storage.
quoted from here:
https://pureinfotech.com/enable-tpm-secure-boot-hyperv-install-windows-11/ Furthermore, Multithreading is not a requirement for hyper-v hosting.